Galvalume Aluminum-zinc alloy-coated Steel Sheet

ARA Corp's Aluminum-zinc alloy-coated Steel Sheet (GL)

What is Galvalume : 55% ALUMINUM –ZINC ALLOY COATED STEEL.

Galvalume (GL) ideally combines characteristics of aluminum coated steel and galvanized steel.

Galvalume steel is the result of an ideal alloy of aluminum and zinc.

It consists of aluminum (55% in weight ratio but 80% in surface volume ratio), zinc (43.4% in weight)

and silicon (1.6% in weight ratio) so it has both aluminum-unique corrosion-resistance and heat resistance

and zinc-unique “galvanic behavior”.

“ARA CORP GALVALUME”, it is new concept steel, which is produced by Korea Galvalume Aluminum-zinc alloy-coated Steel Sheet Mill’s advanced

Technology, is widely used in various kinds of industry such as building interior or exterior, electricity,

Electronic appliances, automobile parts, and drain pipe, due to its high quality and economical efficiency.

Durability - Humidity Test, Salt Spray Test, Outdoor Exposure Test ( for 13 years).

Heat-Resistance – Heat-Resistance of Galvalume is far superior to that of galvanized, and

almost equal to characteristics of Al-coated steel.

Galvanized : Recommendable temperature ; 230°C & under, Discoloration at 250°C

Galvalume : No discoloration even for durable use at 315°C

Weldability - spot and seam welding test pass.

Workability - GL has the same characteristics with galvanized steel sheet in workability & formability, and

especially, micro crack at forming section is much less than galvanized steel sheet.

Therefore, GL has excellent durability at forming section.

Heat-Reflexibility - GL's heat reflexibility almost doubles that of galvanized steel so it has an energy

saving effect. If it is used in roofing and paneling without painting

Paintability – Galvalume can be painted without pre-treatment or weathering when used for signboard or

general purpose, due to its superior adhesive strength between zinc layer and paint,

unlike galvanized steel which requires weathering or pre-treatment.

Surface Treatment. : Chromated, Anti finger Printed, Oiled, CR-Free.

An order of inquiry should be accompanied by the following information.

1. Size : Thickness / Width / Length ( in case of Cut Lengths).

2. Specification requirement : Coating designation or Wt / Type of coating & surface treatment

Coil I.D / Packing Weight.

3. Quantity.

4. Intended use

5. Packing and marking requirement.

6. Delivery Requirement.

7. Required inspection, if other than mill inspection.

8. Other pertinent information.

Packing

Steel Plate has lots of good quality: surface is smooth, high plasticity, toughness and mechanical strength, resisting acid and alkali corrosion of gas, solution, and other media.Galvalume Aluminum-zinc alloy-coated Steel Sheet is a kind of alloy steel and not easy to rust, but not absolutely not to rust. Stainless steel plate can resist weak media such as air, Steel Plate steam and water corrosion resistance of steel, acid steel plate refers to the nedia, resisting chemical etching media such as acid, alkali, Galvalume Aluminum-zinc alloy-coated Steel Sheet salt corrosion of the steel plate. Since the beginning of the 20th century, and stainless steel plate has a history of more than a century.
jhgjhbjh
Steel Plate used for architectural decoration, luxury doors, elevators decorating, metal tank shell, ship building, decorated inside the train, as well as outdoor works,Galvalume Aluminum-zinc alloy-coated Steel Sheet advertising nameplate, the ceiling and cabinets, aisle panels, screen,Steel Plate the tunnel project, hotels, guest houses, entertainment place,kitchen equipment,light industrial and others.